Hacker News new | past | comments | ask | show | jobs | submit
The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.

I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!

After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...

I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.

I cannot recommend a ratgdo[1] highly enough. Since getting one and wiring it to my Chamberlain opener two years ago and hooking it in to home assistant, I haven't logged in to myQ a single time, and should never need to. My family don't even have the myQ app anymore.

[1] https://ratcloud.llc/

The latest Chamberlain openers (Chamberlain Security+ 3.0) don't work with this. There is no wired connection to operate the door, and the wireless operation is completely locked down.
I would bet that there are connectors/test points on the board inside that would be reasonably easy to hook into. Naturally, that is a bit more involved than just hooking up a wire, but still not an insurmountable obstacle if one is already trying to do something like this.
Could be, but also since the opening is exclusively controlled by software, they may not have any need for such connectors. I would check, but they're not particularly easy to poke around once they are installed.
loading story #50561103
loading story #50562489
loading story #50560987
loading story #50563679
loading story #50562734
I also recently installed a Chamberlain garage door opener. I wanted to get it hooked up to Home Assistant and/or HomeKit, but was dismayed to find that they completely lock it down, your only option to operate it remotely is with their horrible, ad-ridden MyQ app.

I ended up purchasing a Matter device which physically presses the button on a factory remote [1]. Ridiculous that such a solution needs to exist.

[1] https://www.thirdreality.com/products/smart-garage-door-open...

OMG so i recently tried to implement the ability to open my garage door, a MyQ door, and discovered all this.

What a mess. I regret letting the installer use this opener. I was hoping i could just figure out what the Android app, or my Tesla does, to open the door and replicate that. Turns out I cant.

loading story #50562390
Jesus I apparently lucked out when I got mine, late 2018? New enough to work with my newer car's openers but old enough where it was just done with a button and a long wire. I was even able to use the existing laser for the obstacle detection bit.

TBQH I used myQ to link it to HomeKit and literally haven't once opened that app since. Sounds like I should keep that going if at all possible.

loading story #50561019
loading story #50560973
The Apple App Store Review Guidelines 4.5.4 [1] have this to say:

> Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.

I am frustrated that Apple isn't using their gatekeeping powers for good. I wonder if users can file a complaint.

[1] https://developer.apple.com/app-store/review/guidelines/#des...

Edit: yes, users can file complaints. If you are an Apple Developer, you can do so via https://developer.apple.com/help/app-review/safe-and-trusted...

You can also follow "Report A Problem" link at the bottom of the App Store's page for the app.

loading story #50564833
Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.

I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.

Ecobee you're next, and I hope you go down in flames having such crap software.

This is why I see no point paying for streaming services that also insert ads. I’ll gladly pirate and feel zero shame or remorse.
Also why I would not even consider paying for youtube. Removing maybe half the ads is not such a great value.
loading story #50563919
loading story #50562078
loading story #50561786
loading story #50564503
HomeAssistant can control the Ecobee through the HomeKit protocol on the local LAN (You do not need any apple devices to take advantage of this).
I'm now only buying devices that work locally with Home Assistant, or dumb devices that I can stick esp32 into.

I've learned my lesson from a pile of e-waste by manufacturers who stopped updating their apps and killed their cloud services.

loading story #50564550
> I will sell/replace/throw every device

doesn't matter. you have already paid for the device. at this point you are worthless to the company. they might maybe squeeze another few bucks from you by spamming in the notitications.

I got an LG projector and the official LG app to control it is just cancerous. Ads, recommended movies and shows, and just soo slow. I dread each time the app updates, because they add something else. Last time was "AI" and voice controls that I keep triggering by accident. Home Assistant detected the projector in the network, and now I can control it instantly. I would be less mad about ads if the apps provided any user value. But no, they always only worsen the user experience.
Woke up this morning to an ad in the Ecobee app for Black Friday savings or something, this post was the top hit on google
Anker/Eufy does this. Very unnecessary especially after spending loads on their robot mop.
loading story #50562330
It's the hijacking of notifications that gets me the most. App store providers should ban any application that puts ads there.

Also would be nice to have a law making ads and payment mutually exclusive. Otherwise the future is one where all products evolve to have both.

The "free market" cannot solve this in a world where products can be (and are) rugpulled to have ads anytime.

My bank sends me emails that are ads for their other services but I guess if they mention my account and claim the email is for account purposes or something they get to claim it's not spam and I can't unsubscribe.
100%. I heavily leverage Gmail filters for this and it works very well most of the time.
Apple used to forbid marketing notifications, but they relaxed their policy a while ago.

What's really needed is system-wide notification channels, a hard requirement on app developers that marketing notifications go into the marketing channel, per-channel notification permissions, and a global off-switch for marketing channel notifications.

Apple needs to break this shitty business model. There's no incentive for Apple to keep allowing it.

Android has had most of this for a while now, though Google's policing of it isn't that great. They have notification categories that can be disabled on a per-app basis, and the app quality guidelines specify the following:

> Don't use notifications for cross-promotion or advertising of another product, as this is strictly prohibited by the Play Store.

> Notification channels are defined according to best practices, rather than serving all notifications from one channel.

I was surprised by the first one as it does feel fairly common, though in my experience apps that do almost always have them grouped in a marketing category so it's easy to avoid after the first one.

https://developer.android.com/docs/quality-guidelines/core-a...

I delete the app that sends so notifications. In a few cases I shut off the notifications.
They relaxed their policy because they themselves were doing it and it seemed too hypocritical even for them
> Also would be nice to have a law making ads and payment mutually exclusive. Otherwise the future is one where all products evolve to have both.

I bought a TV. I don't want to see ads displayed on it.

>hijacking of notifications

This is why I don't let DoorDash send notifications. I just have to watch the app for our delivery, bc if I let them ping me it's a nonstop stream of advertising.

Add the US Postal serverice and their 'Informed Delivery' to this list of organizations using notifications of mail that turn out to be ads.
Eh, it’s just notifications of mail without alteration of the content of that mail. Not really the same thing.
It's digital flyers that aren't actually part of my physical mail. Just advertising.
Do they keep that part undocumented? TIL they have a program that allows marketers to make their flyers clickable.

https://www.usps.com/business/informed-delivery.htm (Interactive Campaign Guide PDF https://www.usps.com/business/pdf/informed-delivery-interact... )

If they’re just spamming, then the opt out pre-screen won’t apply, which is unfortunate ( https://www.optoutprescreen.com/form - request no junk mail there)

Really? I got it about 6 months ago and i haven't noticed any spam yet, maybe it's just getting filtered by gmail automatically.
> Also would be nice to have a law making ads and payment mutually exclusive.

Likewise for online content. Hello, New York Times. Et al.

I pay plenty for a New York Times subscription and the content is riddled with huge ads.

Today's front page screenshot 3 minutes ago:

https://imgur.com/a/1hgKeKf

To be fair, this isn't new. It's as old as newspapers themselves.
True, but ads are a LOT less annoying when they're printed on paper.
"Punch the Monkey" was the point of no return, and that was decades ago at this point.
Have a ceiling fan, it also supports smart control via Tuya.

It’s disturbing opening Tuya, to control the fan, only to often have to scroll past a big ad for Temu dildos and sex toys!

Nothing against dildos and sex toys but I don’t want to see them to use my ceiling fan and the ad profiling must be pretty terrible for a middle aged bloke with no browsing history of dildos and sex toys, trying to turn a fan on, not the misses.

Luckily I can mostly use the home assistant integration but still need to use Tuya for the sleep timer functionality.

Also waiting for the day the smart control stops working as the app shustdown. Specifically purchased the fan as it’s a dc fan with wall controller and smart controls was supplemental to that so not the end of the world but would it be if I purchased it for the smart controls was.

I have a fan device as well that’s basically the same thing, used Claude to hack local Tuya to make sleep timers and color light dimming work without the cloud integration. Side effect is also that it’s instantaneous rather than super laggy like it was with cloud.
{"deleted":true,"id":50560833,"parent":50559937,"time":1795099674,"type":"comment"}
I use this to jailbreak my Tuya devices and run them locally with HomeAssistant. I also create my own custom firmware for them to enhance their capabilities.

https://github.com/tuya-cloudcutter/tuya-cloudcutter

Apple does this with Wallet, yet everyone seems to look past that. I currently see "Apple Card: up to 3% back on all your Apple Pay purchases.", on iOS 27.2.1.
the noise i made after setting up my pihole and seeing an ad for some Apple Service Subscription inside the _Settings_ app

"it's gotten inside the code! run!"

{"deleted":true,"id":50560706,"parent":50558842,"time":1795099131,"type":"comment"}
Wyze cams have gone absolutely apeshit with spam in the last couple of months. They have several different ways to opt out and if you don't find them all, you still get spam push notifications about their latest iot garbage heap offerings.
> Ecobee you're next, and I hope you go down in flames having such crap software.

Oh no. They were on my "next up" list when my Nests inevitably get killed by Google. At least with the Nests, I use a Starling Hub[1] so that I don't have to have Google's shitty app on my phone and can just use HomeKit.

What's the best HomeKit thermostat now?

[1] https://www.starlinghome.io RIP, thank you shitty US government orange menace.

FWIW, I have ecobee thermostats, and have been mostly happy with them. I use iPhone, and haven't had a problem with notification spam. I get my maintenance reminders, and then 'power events' which is where I've tied into the power company, and they give a money credit if they can raise/lower my thermostat in 4 hour windows during peak capacity.

One thing that has actually made me really happy with the ecobee, is beestat.io, which is a website that will attach to your cloud account via API and offers some nice visualizations for your thermostat data. I don't use the ecobee website directly for anything, so maybe that's the crap software he's referring to.

> What's the best HomeKit thermostat now?

Probably the upcoming "Apple Home Collection" Thermostats [1] as I'm guessing they will be tightly managed by Apple. We'll see with reviews though.

https://www.apple.com/shop/home/accessories/smart-home-acces...

Years ago, the combination of my forgetfulness and our urban address led to some thefts -- turns out, the garage is far more secure if you remember to close it.

I looked around for some kind of device that would close it automatically, which apparently doesn't exist -- with good reason, honestly. What I found was a weird little IoT box that functioned as a garage door opener, and which I could configure with an app on my phone to yell at us (via notifications) if we left the door open for more than 5 minutes.

An unsought side benefit that nevertheless became handy was that we could now control the garage door with our phones.

That app was, initially, pretty straightforward and clean -- but over time, fucking ADS crept in. I was about ready to shift platforms to avoid that crap when we moved across the country. We lived in our new place first in a rental while we house-hunted, so I did nothing there, but I absolutely planned to find an ad-free owner-respecting platform for my garage needs in the new house.

Except, well, the house we bought had (has) a pretty dang new opener, and it's delightfully almost-silent, and it has the MyQ stuff built in already. So I'm right back where I started, cursing these craven weasels every time I use the app to get into the garage.

Somewhat ironically, though, our need for this tool has flipped. Now we live in a very secure neighborhood -- kids leave their bikes on their front lawns, etc -- so the "yell at me if I leave it open" function isn't as important. OTOH, since I haven't been able to find a suitable garage door opener that will mount cleanly on my motorcycles, using the phone to get into the garage has become the default.

"I looked around for some kind of device that would close it automatically, which apparently doesn't exist."

I picked up the ratgdo to solve this exact problem, but discovered that it can't detect the garage door state without upgrading the "button" / "control panel" on the wall to one that actually communicates with the opener rather than just basic open/close functions. The recommend button is the 889LM, which, get this, has a close delay function. AKA you open it, and it automatically closes it within a set delay after people stop walking through the safety beam.

So, while I have the HA integration now via the ratgdo, the function I wanted it for is handled automatically.

> some kind of device that would close it automatically, which apparently doesn't exist

Chamberlain has auto closing built in to some of the regular wall controls. Ben using them for years.

{"deleted":true,"id":50562513,"parent":50559960,"time":1795106793,"type":"comment"}
It's atrocious. The worst part is that you might buy a device with a perfectly nice app with no ads, and then years later the vendor updates the app and you're stuck with horrible ads.

The best approach seems to be to only buy devices with official HomeKit support, and pray that Apple doesn't start putting ads in the Home app.

It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.

The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.

It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)

But for apps like those for garage doors, that’s not a viable strategy.

I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).

But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.

For people who can’t jury rig a solution to their garage door opener, what can they do?

loading story #50562362
loading story #50562835
What would it take to make a product that worked the way people want, without ads and marketing? I was thinking about this after dealing with a broken dishwasher and HVAC system. Even the repair guys were saying that nothing lasts any more. My refrigerator is another example where I've had to spend a few hundred bucks twice to fix it and it's not that old.

Are the economics such that it's just not possible to start a company making decent, servicable products?

loading story #50561834
loading story #50563237
On Android, BuzzKill is the way to go.

And for stuff like Domino's, why do you need notifications? Just turn off all its notifications at the Android level.

loading story #50560658
This year, LinkedIn has reset my notifications preferences twice. Do you know how many notifications you need to turn of in the website, one by one? I don't know either, because it's dozens. This is despite GDPR and me not agreeing to marketing e-mails. It's literally illegal, but not enforced.
loading story #50562581
Afaik, the only UI spam is Apple's spam for subscription services that show up in the Settings menu every couple of weeks and after every update, similar to Windows.

How is this a superpower though? It has something to do with them saying "I won't say how to reproduce this here."

loading story #50561204
Afaik, the only UI spam is Apple's spam for subscription services that show up in the Settings menu every couple of weeks and after every update, similar to Windows.
As an example of how AI could work and be actually useful to people, we need an AI that resides in our phones and looks at all notifications on a "virtual" screen before they're displayed to the user. If the AI decides a notification is not an ad, it displays it. Otherwise, straight to /dev/null.

Also (very important) the app never knows any of this happened.

Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?

I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.

Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.

Philips Hue lights and remotes are standard Zigbee devices. Keep the lights, throw away the Hue bridge, get a Raspberry Pi, connect a USB Zigbee dongle, install HomeAssistant. It takes some effort to set it up but then it works great.
loading story #50561809
loading story #50562651
loading story #50562679
loading story #50563916
FWIW I use this style of light switch all over my house and it has never once shown me an ad. I recommend them without reservation. https://commons.wikimedia.org/wiki/File:LightSwitch.jpg
There's always that person ;)

But I control rooms with many lights with 1 switch, dim them, control other areas with motion sensors, and some go on and off automatically. Ah well, not really a requirement for a happy life, I know... Whereas the ad slap is a real drain...

I did make most of the things here in the house myself and saved a lot of work by not having to make all those switching wires in the walls :)

One of the the ecosystem providers (Apply/Google/Amazon) should differentiate themselves by offering a certification level for their ecosystem that an IoT device:

- does not have a subscription fee

- does not sell data

- does not have ads or remarket

- follows basic cyber security hygiene

- is simple to set up (thinking of my parents)

- interacts purely through standard protocols

I have long delayed wiring my home with IoT devices, but would be interested in doing so if I could have some basic assurances about the experience of using it being pleasant and safe. Almost everybody that I know who has invested heavily in IoT has had to treat it like a side project to avoid the various pitfalls.

One of the requirements for the Apple App Store should be that normal alerts and advertisements should be able to be enabled separately. I want Booking.com to be able to tell me about a flight change or about a message from the place I'm staying; I don't want them interrupting me to sell me some random garbage.
loading story #50561507
loading story #50563278
Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.

Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.

I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.

I got a pair of ratgdo32s the day Home Assistant got cut off from the ecosystem, and they've been great. I definitely understand not wanting to replace something you've got, but they're so cheap for what you get and the guy making them does such a good job that it's worth considering the upgrade if only to support ongoing development.
Had the same issue (the original ratgdo being unstable) and I finally just got the ratgdo32 and it's been working beautifully with HomeKit.

I wonder if someone will try to use AI to optimize the 8266 version to better handle RAM etc.

For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.
Chamberlain made a new protocol that breaks the ability to do this with their new openers. They’ll get away with it too because there’s not many options for garage door openers and most people just buy whatever the contractor installs
What a horrible horrible company.

It's a garage door opener it has two modes, opening and closing. The fact that they have an app you have to sign in to and provide your email to and they are actively stopping integration with the likes of Home assistant to make you use their horrible app is just absurd.

I shouldn't be getting spam because my garage door is selling my private data.

For anyone wondering, get a Genie instead. I have one for over a decade and it works great.

loading story #50560639
I used a 10 dollar sonoff wifi relay, soldered a zener to it to power it from 5V and cut the Live tracé so it can be used as a dry contact relay.

It just need to give a short pulse to start and open/close the door.

And to read out the door state I added a LDR circuit on the GPIO that is attached to the motor LED.

Has been working very well last three years using HA. no need for any of that expensive cloud connected hardware.

loading story #50564598
If you want something more plug-and-play than the Ratgo, Tailwind is ~$120 and integrates with Google Home / Alexa.

I bought a house that came with a Chamberlain garage door opener. At $20 I figured I would try the MyQ device to see if it's as bad as people say. It is that bad.

I bought the Tailwind device and it is exactly what I wanted. I can tell Google to open/close the door. My only complaint is that Google makes me tell it a code to open, but you can put it in one voice prompt "hey google open the garage door with code NNNN".

it appears the only way to use Tailwind locally is to sign up with them and get a "Local Control Key" from their online portal?

I wouldn't consider it prudent to replace one cloud-dependent service for another. Fool me once and all that.

loading story #50563020
I just came here to advocate for tailwind. I bought one 3 years ago. It has been great. Zero spam.
I had a chip on my shoulder with something similar recently - using the Nanoleaf app to pair and control my "holiday string lights". I worked with Astra for a bit and got a script working to pair it to my Home Assistant entirely from my computer. No nanoleaf app, no apple Home app. And now I can also program it entirely from Home Assistant, too. As far as I can tell this didn't previously exist as an option for these.

https://github.com/brynnb/nanoleaf-holiday-local

We need to expand the CAN SPAM act to cover app notifications. Really for something like a garage door opener there should be class-action lawsuit options getting injunctions against this sort of behavior. Even including ads in the app seems inappropriate.

Of course the flipside is that if your thing depends on an app you need ongoing maintenance, but if you've got an advertising-riddled app spamming notifications it seems like the prophylactic is indistinguishable from the disease it prevents.

I love my 25 year old, completely dumb garage door opener. We have a button in the cars and a keypad on the outside. Plus, it’s so loud that if it were to ever open during the middle of the night, it’s a wonderful security alarm.
I never (and would never) hook up myQ to my network, even my IOT VLAN. Immediately upon getting new garage door motors I installed ratgdo devices and monitor it via HomeAssistant and do get push notifications to my phone if a garage door is opened between certain times. Works perfectly… HOWEVER, this didn’t prevent me from buying Chamberlain garage door motor and thus they likely don’t give a crap and won’t stop making horrifically stupid hostile consumer decisions. There really aren’t any good options (atleast in USA).
I love that ratgdo stands for "rage against the garage door opener". I bought a pair for my own garage because I wanted home assistant integration and the native garage door app disallowed that. I feel like an element of spite is in there as well. I've already paid for the machine, if you hamstring my use of it I will do what I can to cut you out of my life.
Feit Electric and Arlo have also started pushing ads, probably within the past few months. Before there were zero ads... for years.

Technically it is against app store review guidelines to use push notifications for ads, unless the user has specifically opted in. I'm guessing it's difficult to catch during app review, or reviewers don't care.

> 4.5.4 Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.

https://developer.apple.com/app-store/review/guidelines/#:~:...

There is definitely no way to opt-in our opt-out in Feit or Arlo. My guess is the same with all these other apps.

We say this about many things in tech, but IoT really seems like an area that's long overdue for some kind of open protocol standardization. The device makers can build their services on top of it and run whatever business model they want, but they should at least be forced to give us an escape hatch.
Z-wave/Zigbee?

There may be some licensing or something else that makes it not an “open protocol” but I couldn’t be happier with my Z-wave and Zigbee devices. I’ve never seen a push notification from many of them because they don’t have access to the Internet. The manufacturers can go out of business and I wouldn’t notice or care.

Pair that with something like home assistant, and you have perfection (in my eyes).

loading story #50561012
Maybe I’m misunderstanding, but isn’t home assistant what you’re describing?

https://www.home-assistant.io/

Home assistant is a great home that includes all of the various softwares and iot protocols from various vendors, but it's not a protocol in itself.

What OP is asking for is closer to Matter / Zigbee / Z-Wave, a protocol in which any hub can control any device: And things are getting closer to a standard with these!

That is, as long as device manufacturers actually use them and follow the specs

It wouldn't bother me one bit if apple/google banned advertisements in notifications period.
Apple themselves is guilty of abusing ads in notifications with the F1 movie add from apple wallet a year ago [0]. At least since then they’ve added the ability to turn off ad notification… from the wallet app. (ads are still enabled by default).

0: https://www.macrumors.com/2025/06/24/apple-wallet-notificati...

They sent me a new control board in the mail anyways because I couldn’t get the old homeowners’ info to dissociate with my door opener in the MyQ app
I want to feed all my notifications through a jev like model with a prompt I control to determine if they are shown or not. Not rely on the out developer to behave, just filter if spam then ignore.
Its weird manufacturers even try this - I'd bet a significant amount of money that this fancy garage door opener was marketed as a premium solution - and you couldn't just replace the motor and endstop sensors, you had to replace everything.

Meanwhile there are Zigbee solutions you can order from Aliexpress for like ten bucks, and those only need to be wired into your existing opener, so install consists of an hours's worth of fiddling with wires.

Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.
Don't even necessarily need to solder: I upgraded my garage door with a Shelly relay, a reed switch, and ESPHome. Maybe the ratgdo devices are doing a bit more, I'm not familiar with them, but there's probably still much cheaper pre-built boards available that can do the same job.
On a chamberlain like this the ratgdo is able to give you partial open/close, light control, button feedback, etc. Have I ever needed to open my garage door to 48%? No, but I could.
My very first tech project was a relay board, raspberry pi, and learning python. Long before AI. It was very fun
Similar story for my detached garage on my first home.

I got a Raspberry Pi, added a camera, pointed the camera at my man door then added the following features

- Push notifications if garage door or man door were left open more than 10 minutes or opened between 10:00PM and 6:00AM

- Camera takes photos every second while the man door is opened or motion detected, uploaded to my NAS

- Door open/close control via buttons or voice command

Was a fun little project. I abandoned it when I moved to a house with door openers which run off the myQ app. I haven't had the ad issues OP has (yet) so I've not been motivated to rebuild a custom solution.

There's a term for this. It's called "enshittification," and it's a cancer on our technological society.

I've never understood how technologists, product managers, and marketing people can sit in the same conference room and collectively decide, "Hey, let's start sending unsolicited marketing push notifications to our users, and while we're at it, we can make another $1,000 a month by stuffing Google Ads into the app."

And then everyone around the table nods their heads and says, "Great idea, let's do it!"

If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.

I genuinely cannot comprehend the decision-making process that leads an entire room of supposedly intelligent people to agree that deliberately degrading the user experience for a few extra dollars is a good business decision. These are not freemium products - these customers paid for these products!!

loading story #50563423
It's probably small companies that get bought by some PE fund, PE wants higher dividends so they push management to get "creative", management tells people "ok guys, we cannot increase sales more, so milk the customer with some ads."
> If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.

Sure. Then they'd call security, and reschedule the meeting to the next day. The next day, everyone would say "Great idea, let's do it!"

The problem is the incentives created by the pervasive digital backdoors products now ship with (for decades now). Consumers just aren't that forward thinking or self actualizing (or they would have never adopted these products in the first place!). Once one company does it and gets away with it, then all the rest follow.

The only thing that is really going to fix it is laws, and good luck with that with our corpo-pwned government. If you sold someone a device that you had added retained remoted access to, and then used it to harm them and benefit yourself, you'd be facing CFAA charges - even if you slipped some legalese nastygram in the box along with it. But when a corpo does the same thing, it's just a "profitable business practice".

I have the dreaded MyQ because my new Honda didn't come with Homelink buttons and they make you tie into MyQ to access the opener via CarPlay. If any of this has a CarPlay solution, I'm in.
It works in the Home app and therefore in CarPlay. You can ask Siri to open your garage door or setup geofence actions in Home.
For every blogger who designs their own way around this, there are somewhere between 1000 and 10,000 users who just put up with it
For an older opener that has a button on the wall, consider installing a fingerbot or switchbot next to the button to physically push it. These can be controlled remotely.
I went with a Meross MSG100hk garage door interface. It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.
I use Inovelli switches in my house as indicators of status. Red Flashing doors unlocked, faster red flashing garage door open, etc. I like not having to use my phone to find notifications. The light that would go on when the door was up made me think of this.
I use cheap z-wave tilt detection sensors with home assistant to keep track of garage door state. After 10 minutes there is an Audible reminder that “Garage Door is Open” and the light behind my tv turns bright red. It is simple and works beautifully.
Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.
Still requires using a 3rd party service, sending your data to them, and their app. They could sell your data or include ads too.
I went through this exact pipeline last year.

Chamberlain used to have a HomeBridge, that connected to HomeKit, device that would sit in your garage and sit on your wifi network. It would pair with the opener similar to how a normal wall-mounted garage door panel would. Not only was this setup a little clunky, it was slow. The Siri -> Door open process would often take 5-10 seconds. This wasn't great, but it worked. Sort of.

Then, they did two things that made my blood boil: they discontinued support for it and prevented you from repairing the device with their myQ app, then started using notification for ads.

When I was about to sink an unhealthy amount of time into a garage door opener, ratgdo came in and rescued me. Not only was it simple to install but it was lightning fast. On the same network, it started opening and closing the door the second the Siri command went off. I can only assume that the previous system used to do roundtrips to Chamberlain and the connection wasn't the fastest in the garage.

Ratgdo man, if you read this you have my thanks (and my money, obviously.)

I pulled out the "free" MyQ stuff years ago and replaced with the "timer" Chamberlain controller that closes the garage door after an interval. But I don't recommend it - this hardware is bad: when the capacitor fails after 4 years, it opens the garage door and stays open (even the updated model failed after a few years). This company is on the wrong track.
I interfaced an ESP directly with the garage door button and a limit switch, connected and controlled with a Telegram bot. Been working great for years and cost me about $5.
Even Apple themselves participates in the push notification advertising these days. For me it's the quickest way to get your app's notifications disabled.

For the OP, do you really need to fire off expletive-laden rants at these people? Why harbor such hatred in your heart and words when you could just say, "Here's what bugged me, and how I fixed it. Now I don't need your product." That's all you need to say.

loading story #50563520
I just installed a Shelly 1 Gen 3 relay inbetween the garage door opener and the button. Now controlled via homeassistant, or shelly button on my keyring.

Although it only triggers the button. So no information on whether it is opened or closed.

I have used https://konnected.io with my newish Chamberlin. It works great with HomeAssistant and bridging it into Apple Home.
Best thing I did when I got our new place was get a Z-Wave relay module (any smart relay will do) and wired it up exactly like a push button on the opener, just a quick button press in Home Assistant to flip the relay on/off in a cycle making the door open or close. Cheap, easy, entirely offline :)
As far as I know, it is not allowed on Android to send advertisements in notifications. Not even in a dedicated channel. But Amazon does it no problem. And plenty others. Very tired
The sad part is most users won't have the ability or skill to replace the garage door controller and software like you did. That's what the manufacturer's counting on thereby making it still worthwhile for them to flood them with spam.

And if everyone's doing it what choice do you have? If someone actually starts selling these devices there's a good chance the manufacturer will sue for patent infringement, DCMA reverse engineering or some other guff.

As much as you hate to see this, we need regulation around this
I use my Tesla Model S as a garage door opener. It has Homelink and I can trigger it from the Tesla app. Most expensive garage door opener ever.
I am surprised no one mentioned the even bigger scam Amazon is perpetuating. After setting up MyQ device, you'd be "delighted" that it automatically appears in your Amazon account. To further delight the customers, Amazon drivers can open your garage using MyQ and "securely" place a package in the garage, close it and leave.

You see when you install MyQ, by default it opts you in for in-garage delivery. And here's the beauty, you also need a PHD to figure out how to disable the setting in Amazon. (reference: https://support.chamberlaingroup.com/s/article/myQ-and-Amazo...)

I unplugged my myQ garage door opener and just manually open it, the spam was so bad. Whatever, I will walk into the house, open the door, and pull in, and close it, to not deal with it. Also, I've become paranoid about hacks lately and once a hack can manually unlatch the lever and get inside, I'm cooked anyways.

I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.

ThinQ has a fully local replacement that lets compatible devices work with home assistant:

https://github.com/anszom/rethink

loading story #50562427
Blink, the AMZN owned WiFi cameras (which, credit where credit is due, have been running flawlessly without a subscription for 5+ years for me), recently started sending me emails for "troubleshooting" a camera that's down. The "troubleshooting" is replacing the batteries. It comes with an ad to buy a specific brand of lithium batteries. On Amazon. They haven't had the audacity to send a push notification for this yet.

I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.

Ah, spam from a garage door app.

On Quora there has been a slew of spammers trying to sell garage door openers. It's probably just a scam, but it seems a pretty niche scam.

I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).

A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.

I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.

But, why?

It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!

I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/

A thief going into your basement by hacking your garage door may not be a realistic scenario, but your garage door being hacked and used in a botnet or intercepting your traffic and injecting malware into it is very much a thing that may happen.
Oh, I absolutely agree. I have a fair amount of confidence that no device in my home is going to be able to talk to the outside world, at least without me knowing, but that's only because of all of the ridiculous things I've done to make sure they can't - isolated networks, alternative firmwares, etc.

For the garage door opener, I haven't actually gone in to see if I can completely turn off the WiFi/BLE capabilities. If I can't, I'm still only going to allow control through the relay, but I'm considering putting the receptacle itself on a controller too so it only gets power when an open/close request is received. That'll break the manual button control, though, so I'll have to also add a new button that isn't actually directly connected but instead triggers the power-up request prior to the open request... it's a good thing I like building Rube Goldberg machines.

Interestingly, I have a commercial device from Chamberlain that’s the opposite: it doesn’t work with ratgdo or even Chamberlain’s MyQ crap. The only way to control it is with a Security 2.0 remote (or whatever it’s called) or plain dry contacts. And it gives an ample selection of dry contact control and status terminals.

I assume this is because commercial users have control stations that use dry contacts, and the modern crap is simply a nonstarter.

I am also a happy user of RATGDO thanks to Genie royally screwing up an update to their Aladdin Connect software: https://github.com/home-assistant/core/issues/181420

I'm keeping it simple now, HomeKit or bust for the smart home.

A few months ago I read that Security 3.0 breaks ratgdo, and that maybe the wired buttons aren't using the wires for anything but power, they open the door through encrypted Bluetooth.

The way around it is to solder onto the contacts of their proprietary buttons.

Anyone have updates on that situation?

I have myQ also, but solved this problem in a different way.

I use NextDNS, which allows me to block ads (including a lot of mobile ads) at the DNS level.

I disabled all notifications for myQ.

And I configured the garage door to auto-close at 9pm.

I do the same. Does your myq app take a long time to load when opening? Mine takes a very long time (>30 sec. sometimes) despite troubleshooting measures, and I'm wondering if it's because of blocked advertising.
> I was able to rebuild Dad's solution in software with Slack

This hack could be monetised at this step, by allowing adverts at this step. This would complete the (tech) circle of life nicely.

In which I bypass myQ for an open source solution
Great post, right to the point. Love it.
this echoes my own frustrations with the user hostility of chamberlain/myq. an added bonus is that in the app they force you to use to control the door instead of integrating with home automation standards, the video banner ads will force whatever audio you might have playing on your device to pause. they're testing the limits of hanlon's razor over there.

i've been meaning set up a dedicated domain/website just to collect complaints about this company's behavior, alternatives, workarounds for their failures like the one posted here recently [1], and importantly, laws. we need laws.

mentioned already in these comments: granular control over notifications between marketing & functional, and no circumvention by intermingling the two. home automation devices may be allowed to traverse wans to offer remote control for non-vpn/sd-wan users, but should not have their core functionality _or_ initial setup depend on an internet connection.

finally, locked devices produced by companies over a some market cap or another and their subsidiaries should be required to offer a bootloader for user/open firmware after some reasonable period of time to mitigate some of the mountains of ewaste we are producing with this stuff.

1. https://news.ycombinator.com/item?id=50525260

If you're lucky, you'll have an older garage door opener - and they're controlled by simple switches (normally open). You can drive that with buttons, relays, wifi/bluetooth/zigbee/whatever. You can even use access control panels that suck less and aren't as insecure as what the manufacturer offers (hopefully).

Be sure to turn off/disable their old school RF stuff too.

Not surprising that they're pulling a John Deer and making simple things proprietary so they can enshitify you into their ecosystem.

There are some appliances that simply don't make sense to grant IP addresses and network connectivity. The moment your magical home server takes a lightning strike you are back in the stone ages, potentially significantly worse off than someone who just had a bunch of dumb shit in their house.

I don't know why we approach everything like this as a challenge. Certainly, we can make this work. Technically there's nothing stopping us from integrating anything with anything else. But, what is the cost of maintaining this? How many others in your household are into your hobby as much as you are?

loading story #50562448
It's a cool solution. It's too bad they don't care and according to market dynamics shouldn't care. One user opted out. You lost time to building your own solution and they lost nothing. Many such cases.
loading story #50562322
OP, if you're reading this, I love the Nessie in the corner.
Using the eufy app I am constantly frustrated by things like this. I don't get notifications but when I try to use my robo vac outside of its schedule I am bombarded with ads that are hard not to click and then I have to exit the app and restart.
> I continued using it because I trusted that notifications were meaningful...until recently (October 2026)

it should be illegal for someone who had a good idea once to be allowed to leave that good idea in the hands of others

Glad to have seen this since I will be looking at garage door openers soon.
Dad's mercury switch was a better design. This is introducing a massive attack surface.
loading story #50562940
I'm really, incredibly disappointed that Apple (or Google for that matter) doesn't enforce some sort of CANSPAM on notifications.

I need your business notifications, I do not need or approve of your advertising/product updates.

For my mobile OS, all notifications look the same. "AI priority" is the only attempt at this but I don't need AI priority if I have a very tight-knit circle of apps that can send notifications.

Then one important app sends me spam and I turn it off immediately.

those sweet sweet app store fees
Had a similar experience with a niche phone made in the UK from Wileyfox. After they entered administration all the app updates contained some funky 'add ons'
Whenever I see something like this, it reminds me of how frustrated I am with the majority of people for not only accepting this, but falling for it.

The reason ads come at us from every fucking angle of life is because they work. That’s unacceptable, imo.

They don’t work on me, they don’t work on you, so who the fuck do they work on?

The answer: most people. And that’s why they keep showing them.

All of the anti-patterns we all hate only perpetuate because they work.

We really need to figure out a way to educate people better so that these practices stop working. And I’ve no clue how to do that (tried with my parents, failed miserably in a cloud of “this is too confusing I don’t care.”)

I love this solution, and would encourage being very careful when sending wireless garage operations .

Wired and wireless layer 2 protocols have retransmission and your layer 7 app can receive duplicate commands. Be sure to add deduplication logic to the command e.g. using a nonce or transaction id. You have to be very careful that your layer 7 app doesn’t play the “open” command twice and close the door.

I’d happily buy your product to replace my MyQ. I hate the spam, and it’s just plain buggy. Plus the base station runs loads of unwanted services. I haven’t fully audited it, but I’m sure it’s a security nightmare.

Normies are just not that offended by ads
Home automation was better off with X10

Uses your existing wiring, etc.

Then they went off the rails advertising their tiny spy cameras in pop-unders, as one does.

https://www.uxmatters.com/mt/archives/2009/10/images/figure_...

Am I missing something here? Why not just disable marketing notifications instead?
There's no option for that
Tailwind is also great.
Ah, this is so cool.

When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.

They seem to have disappeared, but there was a company called Flash2Pass (later Flash To Open) that made a garage door controller activated by flashing your high beams twice. I have it on my bikes and it makes for a really seamless entry; I don't have to take my hands off the controls, and the range is long enough that the door is open by the time I ride up.

Another option: https://www.youtube.com/watch?v=d3rfaCfImwE :D

Unluckily they discontinued making that second option.
That video caught me off guard!
This is exactly what I do with mine. I have a ratgdo connected to home assistant with my garmin (watch) setup to control it. Being able to open / close my garage without pulling anything out and just ride my bicycle in is pretty amazing.
That’s exactly why I setup an open source device on my older garage door. It’s only accessible from my local network, and I have my appletv setup as a HomeKit hub, so I can double tap my off brand cardo to give the voice command to open the garage door on my bike. My only irritation is that each major iOS update changes the settings on condirming the command, so out of nowhere my phone will ask to be unlocked to confirm the command. Then I have to figure out what setting changed on iOS to reconfigure it again.

I also have a nodered automation setup that sends a push notification if the garage door is open for more than 30 minutes, so I don’t accidentally leave the garage open overnight. Works great.

At the end of the day the opener is a motor and a couple of limit switches on the door track. Should be easy to totally bypass whatever "smarts" it ships with, using an arduino or something.
loading story #50562417
I have a Chamberlain/myQ garage door opener, but I do not own the house (it's a townhouse I am renting). This probably limits my ability to install/use Ratgdo.

I also hate the amount of ads the myQ app has, like it's pretty much nothing but ads (and reporting this to the Play Store does nothing).

Currently, my garage door opener is connected to my WiFi (on its own "IoT VLAN") because I once had to use myQ to open my garage whilst away to let my friend into the house.

Normally, I just use a "normal" garage door opener remote (and my car's built-in HomeLink buttons).

Thank you for writing this and for that last sentence - "To anyone at Chamberlain responsible for myQ...". The MyQ spam is atrocious and the repeated attempts to rent seek for what is a basic feature have been grinding on me for a few years now.
Out of curiosity, how's the device doing on FCC certification?

Using a pre-certified module doesn't let you bypass certification.

That’s cool and i loathe the myQ ads too. No idea what idiotic marketing decision drove them, as i eagerly search regularly for alternative lifters. Like is Chamberlain the only game in Oz and Europe like in the US?
Even in the US they are not the only game. They are just the biggest, but there are other options if you look for them. Don't let a tech install whatever though, you need to demand something else.
As long as they're not targeting your garage door AI, persuading it to autonomously buy all those shiny garage-door-enhancing products...
this is just the rokufication (enshittification of smart TVS) expanded to all physical devices.

sell it as a loss leader and make the money up on ads / revenue. Once you install something (physically), it's almost not worth it to uninstall it. Expect this with all "smart" iot devices

A MyQ costs 50$ (sometimes down to 19.99 on sale), there's a reason for that.

> I offer my sincerest Fuck You
{"deleted":true,"id":50561805,"parent":50519231,"time":1795103948,"type":"comment"}