A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/