Teaching robots to carve marble sculptures
https://eleanorwiesler.com/blog/robotic-stone-carving/1) A great podcast about why we're bad at statues in the US:
https://slate.com/podcasts/decoder-ring/2026/07/how-taste-po...
2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewing from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.
But they do it in stone (they don't seem to mention what kind of stone, tho). I think marmble is a different experience, and I wonder what the implications are. Often enough marble requires an experienced master to "read" it. Since it's a natural stone there will be veins, imperfections etc. Sometimes you'll have to work around it and alter your design slightly while carving - which is not possibble if a robot just does its lusterless job.
While I admire this task, and I hope that we will see more carved stones in our buildings and surroundings again, I also hope that we can use technology as our aid, not as the end in itself.
There is a manufacturer in Germany who does exactly this, btw (rough cuts by robot, fine tune by human masters). So there is a lot of prior art out there - I wonder if there was anything new at all.
On the one hand, there is something special about an artist made sculpture. But on the other, in north america we have almost no cool sculpture around us day to day. So few people can make them and there is seemingly limited demand due to costs
If companies start producing millions of sculptures and selling them at walmart or dollarama in bulk, will they still be cool? Or will we make them in our garages in 2036 with robot arms and ai generated designs informed by amazon ring camera footage of our neighbourhoods?
As an artist, what does your role become? Does anything remains scarce in art? Would love to hear some speculation
Is there some technical novelty to it? The hero image on the company website is an Arc de Triomphe that doesn't seem to be the one in Paris, it is like they are a startup specializing in quickly producing artistic stone decor for projects like the arc?
https://www.youtube.com/watch?v=qJgdijvbJWg
https://www.youtube.com/watch?v=kyHz90gA21s
'The Release from Deception' (1754) by Francesco Queirolo
https://mymodernmet.com/francesco-queirolo-the-release-from-...
It's especially a sub-par choice for the demonstration at hand because the surface texture is too smooth. At the time, digitizing smoothed/skipped/undersampled details.
See a picture of the original[1] and compare to the detail on the marble carving.
[1] https://i-blog.csdnimg.cn/blog_migrate/383571b9f94546ab262f7...
https://www.fox8live.com/story/31913419/robot-brings-mardi-g...
That said, the whole air-rights footprint-build issue isn't one of capability so despite the ability to create sophisticated friezes on the cheap, I do wonder how much we'll actually use them...
The only voice left is Claude’s.
It was cheaper to spend a trillion dollars on LLM’s and robotics and then “teach” a robot to carve out this first year bunny assignment rather than pay any artists or stonemasons. Historically their work can last for thousands of years and bring beauty to millions yet unborn who will marvel at the magnificence of this creation. But you know this little stone rabbit is cool too. I’m sure it will make a useful doorstop. Now we can have stoneslop!
If the whole purpose of a marble sculpture is to marvel at the beauty a human created -- not being the type to surround himself with marble, I am only guessing here -- then I don't see the point of this. Except it was probably a fun project.
I'm both awestruck at the at the final sculptures, as much as I am fascinated by the (hi-tech) robotic carving aspects of it.
The Feynman statue looks awesome (https://www.monumentallabs.co/work?project=Richard+Feynman ) as does Athena (https://www.monumentallabs.co/work?project=Athena+Promachos )
The details are just jaw dropping. Are the details carved by human hands or by the robot itself??
As an amateur artist and as a robotics techie, I'm both fascinated -- and alarmed -- by the use of AI in the process. Part of the artistic process has always been the "human struggle", ranging from inspiration to the actual hard work of putting pencil / paint / chisel to work. Often, but not always, that has determined our value of the work, whether it is the Sistine Chapel or the Last Supper, or indeed Shakespeare's plays. With AI tools short-circuiting the necessary "burden" of the artistic process, whether generating the next token, or next pixel, the chunk of stone, or the next note in a musical score, our value of that resulting work changes (and has changed). Sometimes dramatically. Who'd prefer the n-th copy of Warhol's "Campbell Soup" or the Marilyn posters if they had the opportunity for the original (painting?)?? Which would you rather hang in your living room??
For sculptures, the work is a physical entity, in your face, sometimes architecturally, sometimes not. Even then, does the provenance of the sculpture actually diminish its value?? I'm not so sure. I do welcome these robotically made sculptures, but I do wonder if/when there are too many of them, all around. Kinda like AI-slop articles on the webz.
I dont have any solid answers... just some feelings (pls. dont call 'em vibes)
Regardless, at least for now, I do love these, and I'm just fascinated that this tech is being used to create more art. We all could use more of it in our lives.
[To the OP: I have a few more ideas on what else we could create. Happy to chat.]
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?