https://starlink.com/support/article/1192f3ef-2a17-31d9-261a...

> Starlink offers two IPv4 policies, "default" and "public". The default IPv4 configuration uses Carrier-Grade Network Address Translation (CGNAT) using private address space from the 100.64.0.0/10 prefix assigned to Starlink clients via DHCP. Network Address Translation (NAT) translates between private and Starlink public IPv4 Addresses. Starlink supports native IPv6 across all Starlink routers, kit versions, and service plans. All IPv6 compatible Starlink router clients are assigned IPv6 addresses.

> The Starlink public IPv4 policy is an optional configuration available to Local and Global Priority customers. A public IPv4 is reachable from any device on the Internet and is assigned to Starlink network clients using DHCP. Although truly static IPs are not available, a reservation system retains the public IPv4 address and IPv6 prefix even when the system is off or rebooted. However, relocating the Starlink or software updates may change these addresses. Public IPv4 addresses are available to the Local and Global Priority service plans. The public IPv4 option can be enabled from the account dashboard, see instructions here. Note: Starlink WiFi routers do not support port forwarding or firewall rules for IPv4 or IPv6.

That last bit means you need to use your own router plugged into the ethernet port of the transceiver.

Also, 99%+ of RV internet users get by without static/public IPs, and millions of home internet users do too. I'm a hacker and network administrator, it's not a big deal for me. They give public routable v6 /56 everywhere, so if it's a huge issue for you, you could set up dyndns and use v6, or run an overlay network.