A 240Hz wave would have a period of 4.17ms. 480Hz is 2.08ms. Much closer to the oscilloscope waveforms. And even then the waveforms are periodic, with smaller troughs at every second dip.
I wish I could see their test setup. It would be ironic if the panel was fully DC dimmed and the troughs were from another light source or something…
I’m not sure why the scope is saying 240 though. It makes me doubt my understanding :-/.
[Edit: Ah - got it! It’s measuring the frequency of the very lowest points - the ‘every second dip’]
The value is waving, so a complete cycle is when it got back to where it started: that is, not just its value but its _direction of change_ is also the same.
(A value waving in 3D could coincide with its start value multiple times before it completes a whole cycle.)
⃰ ⃰(brightness - presumably the test setup is an LDR or something?)
Here's notebookcheck's review methodology:
https://www.notebookcheck.net/How-does-Notebookcheck-test-la...
And the sensor they use might be this one:
https://www.thorlabs.com/item/PDA100A2
That doesn't look like it's even close to being able to focus on a single subpixel or even a single row without additional optics.
In any case, the 0% and 25% waveforms look pretty bad. In my experience, light with sharp, short pulses (like "driverless" LED lights produce) are unpleasant, but the unpleasantness is related to how bright the source is compared to everything else in the field of view. (The 0% and 25% waveforms are solidly at twice the frequency of driverless LEDs, which will make the effect considerably less bad.)
Surely someone on HN has the equipment and curiosity to double-check all this as a Sunday afternoon project?…